The Effect Of Locally Prepared Soaps With Different Oils On The Colour And Dimensional Stability Of An African Print Fabric

Authors

  • N. O. Sawyerr Department of Textile Design and Technology, Takoradi Technical University, Ghana.
  • P. A. Danquah Department of Vocational and Technical Education, University of Cape Coast, Ghana.
  • A. Benson Department of Textile Design and Technology, Takoradi Technical University, Ghana

Keywords:

Azumah blow soap; Shrinkage; Colourfastness; African print

Abstract

Ghanaians that patronize the locally produced soap “Azumah blow” have raised concerns about the quality and its effect on fabrics. Meanwhile, palm oil is the oil used in its production. The aim of this study was to vary the oils for the production of the soap to determine if a change in oil used can reduce or eliminate the soap’s effect on a textile fabric. The objective of this study, therefore, was to investigate the effects of locally prepared soaps from three different types of oils on the colour fastness and shrinkage of an African print fabric from TexStyles Ghana Limited (GTP). Palm oil, Palm kennel oil and Coconut oil were used in the preparation of the soaps. Test specimens were subjected to washing with the 3 different types of soaps at 600C for 30 minutes using the standard Launder-Ometer (Gyrowash 315). Each washed specimen was dried at room temperature. Dimensional stability was measured with the aid of a tape measure. Colour fastness and staining were measured by means of grey scales. The results indicated that soap samples employed for the study generally showed less change to the dimensional stability of the fabric used for the study. They were gentle on the colour staining properties; however, the coconut oil soap had the best performance compared to the soaps with palm oil and palm kennel oil. It is recommended that other performance attributes of cotton fabrics are explored with these types of soaps to give an overall picture of their total performance.

Author Biographies

N. O. Sawyerr, Department of Textile Design and Technology, Takoradi Technical University, Ghana.

A Lecturer 

P. A. Danquah, Department of Vocational and Technical Education, University of Cape Coast, Ghana.

Assistant  Lecturer

A. Benson, Department of Textile Design and Technology, Takoradi Technical University, Ghana

A Student

References

Amenumey, D.E.K. (2008). Ghana: A Concise history from pre-colonial times to the 20th Century. Accra: Woeli Publishing Company

Atta, O. S. (2013). The woes of Apostle Dr. Kwadwo Safo Kantanka as inventor. Retrieved August 5, 2016, from https://www.newsghana.com.gh/the-woes-of-apostle-dr-kwadwo-safo-kantanka-as-inventor.

Baker, M. (2010). Azuma blow soap. Retrieved August 3, 2016, from https://fellowblog.kiva.org/fellowsblog/2010/06/24/azuma-blow.

BS 1006:A02. (1990). Grey Scale for assessing change in colour. Retrieved April 4, 2014, from http://www.dfmg.com.tw/member/standard/bs/BS-a02.

Donkoh, P. (1986). Small-Scale Soap Making: A Handbook. London: Intermediate Technology Publications,

Fianu, D.A.G., & Adams, M. (1998). The effect of sunlight on the colour of Ghanaian cotton printed fabrics. International Journal of Consumer Studies, 22 (1), 15-18.

Ghana Standards Authority (2005). GS ISO 139:2005 - Textiles- standard atmosphere for conditioning and testing. Accra, Ghana: Ghana Standards Authority.

Ghana Standards Authority. (2012). GS 124: 2012 - Textiles specifications for traditional African prints (3rd ed). Accra, Ghana: Ghana Standards Authority.

Hopkins, (2010). Knowing the components in soap making. Retrieved August 24 2016, from http://goarticles.com

Quame, S.A. (2013). Effects of locally manufactured soaps on colour, strength and elongation of some selected Ghanaian printed cotton fibres. Unpublished thesis University of Cape Coast, Cape Coast, Ghana.

Downloads

Published

2017-03-11

How to Cite

Sawyerr, N. O., Danquah, P. A., & Benson, A. (2017). The Effect Of Locally Prepared Soaps With Different Oils On The Colour And Dimensional Stability Of An African Print Fabric. AFRICAN JOURNAL OF APPLIED RESEARCH, 3(1), 38–44. Retrieved from https://www.ajaronline.com/index.php/AJAR/article/view/197